STILLWATER, USA – New-for-2010 KICKER® DX-Series Amplifiers simply provide reliable, relentless power, and make it affordable for those who seek top features in a high-performance car audio or multimedia system.  An additional, often overlooked benefit is that each individual KICKER Amplifier’s actual power always exceeds its rated power, as documented inside the carton.

A pair of DX.1 Mono-Channel Subwoofer Amplifiers supply all the necessary features expected from high-power, monoblock amplifiers that pulverize subwoofers with energy-saving, Class D power, including the ability to be stable under loads as low as one Ohm. DX Sub Amps are rated at 1,000 watts or 500 watts (1 Ohm at 14.4V), offering an 18dB/octave low-pass electronic crossover variable from 50 to 200 hertz. It also includes an 18dB/octave, high-pass subsonic filter variable from 10 to 30 hertz. They provide +9dB (or 0dB) of bass boost centered at 40 hertz, and include the convenient, mountable ZXRC remote for bass control from the dash.

All KICKER Amplifier models use balanced differential inputs, making them compatible with any factory radio and eliminating unwanted noise within the audio system. A muting circuit cancels out additional noise that may surge down the line, so listeners enjoy the cleanest, clearest sound possible. Additionally, a choice of three automatic turn-on modes (remote, DC offset, signal sense) provide ultimate flexibility.

The DX200.4 Four-Channel Amplifier gives the listener multiple channels for a choice of installation configurations. It provides 50 watts x 4 channels (2 Ohms at 14.4V), and an internal, 18dB/octave all-pass, fixed 100Hz high-pass, or fixed 80Hz low-pass electronic crossover with +9dB (or 0dB) of boost centered at 40 hertz.

Two DX.2 Stereo Amplifiers offer the same outstanding features with 2-Ohm power at 50 watts/ch. or 150 watts/ch. (at 14.4V).

hile KICKER amps are always covered by a two-year factory warranty, KICKER will provide an additional one-year extended warranty with the purchase of a qualifying KICKER installation kit at the time of the amplifier purchase. Consumers should contact any Authorized KICKER Dealer or log onto www.kicker.com for more information.

KICKER performance audio systems, a division of Stillwater Designs and Audio, Inc.®, are available for the mobile and home audio aftermarket at authorized dealers worldwide, and also through selected Original Equipment Manufacturers. Consumers needing more information on KICKER or Livin’ Loud® may call the Consumer Information Line at 1-800-256-5425 or visit the brand Web site at www.kicker.com. Follow KICKER at facebook.com/kickeraudio and twitter.com/kickeraudio.

KICKER DX.1 Class D Mono Subwoofer Amplifiers Specifications

Common to all Models
Frequency Response: 20Hz-200Hz, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 18dB/octave, variable 50Hz-200Hz, low pass only
18dB/octave high-pass subsonic filter variable 10Hz-30Hz
KICKEQ™ Boost: selectable 0dB or +9dB, centered @ 40Hz

KICKER DX.2 Stereo Amplifiers Specifications

Common to all Models
Frequency Response: 20Hz-20kHz, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 18dB/octave, fixed 100Hz high-pass, fixed 80Hz low-pass, or all-pass selectable
KICKEQ™ Boost: selectable 0dB or +9dB, centered @ 40Hz

KICKER DX.4 4-Channel Amplifiers Specifications

Common to all Models
Frequency Response: 20Hz-20kHz, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 18dB/octave, fixed 100Hz high-pass, fixed 80Hz low-pass, or all-pass selectable
KICKEQ™ Boost: selectable 0dB or +9dB, centered @ 40Hz

[Source:  kicker.com]